Brand SearchCategory SearchKeyword Search
All Listings > 


sort by: best match | lowest to highest | highest to lowest
Used Machine Listings
 
BRANDT - KTD51 BRANDT KTD51 EDGEBANDER
Print Item Email this machine to a friend
1989
List Price: $9,500.00
Condition: ATFS
Machine Stock Number: 11388
Member Stock Number: EB070008836
Serial Number:
DD: D

Description:
Used Brandt Contour Edgebander. Model KTD51, For softforming and straight edges with heating device for PVC-edges, Thickness of workpiece: 10 - 40 mm, Thickness of edges: 0.5 - 1 mm, Width of workpiece: min. app. 25 mm, Internal radius: min. app. 25 mm, Forward feed: 4 m/min., Power: 2.6 kW, 480V, three phase Pneumatic: 6 bar S/N 0-260-01-3336
Click for Large Image
 Print Item

Used National Machine Listings
 
BRANDT - AMBITION 1220-FC AUTOMATIC EDGE BANDER
Print Item Email this machine to a friend
List Price: $48,500.00
Condition: ATFS
Machine Stock Number: 7129TS
Member Stock Number: EB020010990
Serial Number: 0-261-02-4178
DD: C

Description:
Used Brandt Ambition 1220-FC Automatic Edge Bander; equipped with an Easy Control EC-10+ Control with integrated electronic line control system; with a joint trimming unit with two (2) motors 3 HP each, 12,000 R.P.M. (one clockwise and one counterclockwise rotation) with vertical spindle adjustment via digital settings with horizontal positioning via electro-pneumatic control and with a dust extraction hood with a 120mm diameter outlet; with an automatic magazine for strip and coil feeding with a large coil table (800mm diameter) with edge strip capacity from 0.4mm to 6mm (0.016" to 1/4") and coiled material 0.4 to 3mm (0.016 to 1/8"); with one large driven pressure roller with pneumatic pressure control and two secondary rollers, all with controlled side pressure with a digital counter for setting of zone control and with a strengthened pre-cutter for thick PVC edges from the coil (maximum 3 x 45mm); with a quick change glue tank for easy maintenance and change out; with a sound and safety enclosure with safety interlock system; with an end trimming station with two 1/4 HP 12,000 R.P.M. motors with electronic motor brakes with program controlled indexing from straight to bevel trimming; with a fine trimming unit with two 3/4 HP 12,000 R.P.M. motors with program controlled positioning; with a contour trimming unit for corner rounding of thick PVC edges; with a profile scraping unit with quick-change feature with program controlled pneumatic indexing; with a finish scraping unit and with electrical controls wired for AC 3/60/230 volt operation; with a feed speed of 33 FPM and having a maximum panel thickness capacity of 2-3/8"; with an additional set of scraper heads for 2mm and with all related equipment and manuals. Serial Number: 0-261-02-4178. (Installed New in December, 2011.)
Click for Large Image
 Print Item

 
BRANDT - KD-77F PROFIMAT AUTOMATIC EDGE BANDER
Print Item Email this machine to a friend
List Price: $24,500.00
Condition: CLEANED/CHECKED
Machine Stock Number: 7105
Member Stock Number: EB020011011
Serial Number: 0-261-02-8224
DD: D

Description:
Used Brandt Model KD-77F Profimat Automatic Edge Bander; with PC-16 Program Control, color LCD screen, 8MB RAM, internal modem and manual push button or program control operation; control panel located at the machine infeed; with digital height indicator with automatic height adjustment with top pressure beam for all work stations; electronic line-control system; universal automatic magazine for coil and strip feeding; with large 800mm diameter coil table; with a Joint Trimming Unit for pre-trimming the workpiece edges with two 3 HP motors and with diamond cutters (one clockwise and one anti-clockwise rotation); Quickmelt granulate glue application system; quick change glue tank; strengthened pre-cutter for cutting PVC (max. capacity of 3 x 45mm) from the coil; infrared radiant quartz heating unit between glue roller and pressure zone; first pressure roller driven and three idle pressure rollers; end trimming unit with two 1/2 HP motors with straight and chamfer capability (chamfer up to 15 degrees) with program controlled indexing from straight to bevel end trimming; with a fine trimming unit with digital "Quickset" system with a tilt range from 0 to 25 degrees with program controlled indexing with two 3/4 HP motors; with a second fine trimming unit with digital "Quickset" system with a tilt range of 0 to 25 degrees with program controlled indexing; and with two 3/4 HP motors; with top and bottom scraping units with pneumatic indexing; with top and bottom tilting buffing units; with an electronic frequency changer for all trimming motors with electronic brakes; with a sound and safety enclosure with centralized dust extraction outlet; with a 3 HP feed motor delivering a feed rate of 46 FPM; and with electrical controls wired for AC 3/60/460 volt operation; having an edgeband thickness capacity of 0.016" to 1 foot, 2 inches and edgeband height capacity of 1/2" to 2-3/8"; with manuals and all related equipment. Serial Number: 0-261-02-8224. (New 2001 and Installed New in 2003.)

Note: A Thomas Model LTT-8 Edge Bander Return Conveyor with 30" width x 25 foot length capacity is also available to be sold with the above Edge Bander at an additional price.
Click for Large Image
 Print Item

 
BRANDT - OPTIMAT KD-68CF AUTOMATIC SINGLE-SIDED EDGEBANDER
Print Item Email this machine to a friend
2002
List Price: $27,500.00
Condition: CLEANED/CHECKED
Machine Stock Number: 214001
Member Stock Number: EB030010622
Serial Number: 0-261-02-5758
DD: C

Description:
Brandt model OPTIMAT KD-68CF, automatic single-sided edgebander, SN 0-261-02-8758, year 2002, wired 208v, 3-phase, 10.5KW, connected 35 amps, overall length 18' 4" x 40" wide, 7 3/4" color flat screen controller (replaced and upgraded in 2012), premill station with two counter-rotating Hi-Freq motors, manually set infeed fence, 5" dust collection port on top of machine, hot melt glue station (rebuilt March 2010), pressure section - one driven and two idle rollers, Siko mechanical digital read-out for setting edge thickness, two-motor end trim, two Perske Hi-Freq motors, flush or 10-degree bevel trimming activated from control panel, top and bottom flush trimming station, two 0.4KW Perske Hi-Freq motors, insert cutterheads with combo flush and 3mm radius knives, six Siko mechanical digital read-outs, two motor corner rounding station, two 0.35KW Perske Hi-Freq motors, four Siko mechanical digital readouts, pneumatic in/out selection via control panel, two motor top and bottom buffing station, two additional dust collection ports at end of machine, heavy duty telescoping outbound roller panel support, 6x60mm maximum banding dimension, with original manuals, tool kit, etc., cleaned and checked, (return conveyor not included)
Click for Large Image
 Print Item

 
BRANDT - K79-2CF BRANDT K79-2CF, 2001 EDGEBANDER, CONTOUR TRIMMER
Print Item Email this machine to a friend
List Price: $17,940.00
Condition: AS IS
Machine Stock Number: I-1-168
Member Stock Number: EB160006141
Serial Number:
DD: C

Description:
Needs new controller/card (Stiles estimate- $12,500) Excellent machine for parts; includes two glue pots valued at $4,000 alone. Parts can be removed, but machine must be sold whole.

AS IS- BRANDT KD-79 2/CF Optimat Automatic Edgebander (2001)


Automatic height adjustment with top pressure beam for all work stations.
Equipped with digital height indicator.
PC-16 Program Control:
• Passive matrix Color LCD screen, 7.4”, VGA standard resolution of 640 x 480.
• 8 mb IDE Flash Disc 100 mhz 486 DX4 Hard Drive
• 8 mb RAM
• Internal Modem for remote diagnostic link.
Signal light at infeed to insure proper spacing of panels
Extended Infeed Fence.
Joint trimming unit for pre-trimming the workpiece edges.
Quickmelt granulate glue application system with approximately twelve minute heat-up time.
Quick-change glue tank for easy maintenance and glue color change, if necessary.
Reversible rotation of glue application roller. Retractable glue roller.
Strengthened precutter for cutting PVC (max. 3 x 45 mm) from the coil.
Infrared radiant quartz heating unit between glue roller and pressure zone for optimum gluing strength.
Four roller pressure zone.
End trimming unit with straight and chamfer capability. Chamfer up to 15?. Pneumatic indexing via program control.
Fine trimming unit #1with digital “Quickset” system. Tilt range 0 - 25?. Pneumatic indexing via program control.
Fine trimming unit #2 with digital “Quickset “ system. Tilt
range 0 – 25 . Pneumatic indexing via program control.
Contour trimming unit for profile corner trimming.
Sound enclosure with centralized dust extraction outlet.
Scraping unit for rigid PVC edges. Equipped with pneumatic indexing via program control.
Buffing unit.
Electronic frequency changer for all trimming motors which also incorporates electronic motor brakes.
Electrical components according to UL/CSA Listings.

Technical Specifications
Edgeband thickness 0.4 - 13 mm (0.016" – 1 / 2")
Coil cutoff maximum 0.8 x 60 mm
3.0 x 45 mm (PVC)
Edgeband height 12 - 60 mm (1/2" - 2 3/8")
Panel length min. 160 mm (6 3/8")
Panel width min. 65 mm (2 3/8")
Panel thickness
- min.8 mm (5/16")
- max.55 mm (2 3/16")
Joint Trimming – two motors 2.2 kw (3 HP ea)
Cutting speed 12,000 RPM
Feed speeds
14 m/min. ( 46 FPM )
* upon selection of the contour trimming unit, the feed speed changes to 11 m/min.( 36 FPM ) automatically.
Feed motor 2.2 kw (3 HP)
Pressure section First roller driven, three rollers idle
End trim unit - two motors 0.35 kw (1/2 HP)
Cutting speed 12,000 RPM
Straight cut max. 8 x 60 mm (3/8" x 2 3/8")
Fine trimming unit #1 .55 kw (3/4 HP ea)
Tilting range 0 - 25?
Cutter speed 12,000 RPM
Fine trimming unit #2 .55 kw (3/4 HP ea)
Tilting range 0 - 25
Cutter speed 12,000 RPM
Profile trimming unit - top and bottom 0.3 kw (1/2 HP ea - two motors)
Total power required 19 kw
Amperage @ 230 60 amps
@ 460 30 amps
Machine length 6740 mm (22’ 2”)
Machine width 1730 mm (68")
Working height 900 mm (35.5")
Total height 1600 mm (63")
Machine net weight (with all stations full) 2700 kg (5940 lbs)

Electrical connection: 208/230 or 440/480 volt, 3-phase, 60 Hz.
Dust extraction: 1x 120 mm (4 Ύ”) 700 CFM, 1x 160 mm (6 3/8”) 900 CFM, 1x 100 mm (4”) 600 CFM.
Compressed air connection: 0.18 CFM per panel, 6 bar (85 PSI).
Automatic Height Adjustment with Top Pressure Beam for All Top Work Stations

Controls Mounted at Infeed of Machine for Operator Convenience

PC-16 Controller with Integrated electronic line control system
• large 7.4” passive matrix color LCD screen
• key pad for easy text input
• key board connection port
• color pictograph display of each work station
• internal modem for remote diagnostic link

Joint Trimming Unit
Brandt Unit #4715
• pre-trimming of the workpiece edge prior to gluing
• two motors, 3 HP each, 12,000 RPM
• one motor clockwise rotation, one anti
 Print Item

 
BRANDT - F 10 BRANDT TOP AND BOTTOM LIP TRIMMER
Print Item Email this machine to a friend
List Price: $3,950.00
Condition: CLEANED/CHECKED
Machine Stock Number: I-1-162 (w)
Member Stock Number: EB160006288
Serial Number:
DD: C

Description:
Cleaned, Checked Very Good Condition.
Laminate Trimmer - milling.
Type/Model: F 10.
Machine Condition: Very Good.
Technical Data:
• Motor: 2 x 0,26kW
• Motor Speed: 2600 RPM
• Voltage: 208-230, 480V, 60Hz
• Table Size: 800 x 600 mm
Click for Large Image
 Print Item

 
BRANDT - MODEL KTD-820 OPTIMAT CONTOUR EDGE BANDER WITH TRIMMER
Print Item Email this machine to a friend
List Price: $29,500.00
Condition: CLEANED/CHECKED
Machine Stock Number: 7096TCF
Member Stock Number: EB020010662
Serial Number: 0-260-02-9659
DD: C

Description:
Used Brandt Model KTD-820 Optimat Contour Edge Bander with Trimmer; having a workpiece thickness capacity of 5/8" to 1-5/8", workpiece minimum width of 4" and minimum length of 4"; with an edge thickness capacity of 0.4 to 3.0 mm; edge height capacity of 20 to 45 mm and an edge length minimum of 10"; this machine utilizes a vacuum hold down table designed to hold large heavy parts stationary while a mobile gluing unit is guided by the operator around the workpiece (the gluing unit is suspended from above to eliminate the full weight of the gluing unit. The gluing unit applies glue to the edging material, presses it on to the work piece and moves via a motorized system which is only guided by the operator.) A coil length cut-off device is supplied to pre-cut the banding material to length. A pre-heating device for thicker PVC edging is standard equipment. The vacuum table has five (5) vacuum pods; with a hand-held trimming unit for top and bottom edge trimming; equipped with a variable speed drive with feed rates from 2 to 14 F.P.M.; working height without vacuum system is 35-1/2" and with the vacuum system is 39-3/8"; with electrical controls wired for AC 3/60/440 volt operation and with all related equipment. Serial Number: 0-260-02-9659. Manufactured in 2005. Installed in 2007.

NOTE: This unit can also be used in an alternate mode to be used with gluing unit stationary and the operator moving the work piece for smaller part applications.
Click for Large Image
 Print Item

 
BRANDT - KD68-CF EDGEBANDER
Print Item Email this machine to a friend
2000
List Price: $27,500.00
Condition: ATFS
Machine Stock Number: 6402
Member Stock Number: EB170011143
Serial Number:
DD: D

Description:
Brandt model OPTIMAT KD-68CF, automatic single-sided edgebander, SN 0-261-02-8758, year 2000, wired 208v, 3-phase, 10.5KW, connected 35 amps, overall length 18' 4" x 40" wide, 7 3/4" color flat screen controller (replaced and upgraded in 2012), premill station with two counter-rotating Hi-Freq motors, manually set infeed fence, 5" dust collection port on top of machine, hot melt glue station (rebuilt March 2010), pressure section - one driven and two idle rollers, Siko mechanical digital read-out for setting edge thickness, two-motor end trim, two Perske Hi-Freq motors, flush or 10-degree bevel trimming activated from control panel, top and bottom flush trimming station, two 0.4KW Perske Hi-Freq motors, insert cutterheads with combo flush and 3mm radius knives, six Siko mechanical digital read-outs, two motor corner rounding station, two 0.35KW Perske Hi-Freq motors, four Siko mechanical digital readouts, pneumatic in/out selection via control panel, two motor top and bottom buffing station, two additional dust collection ports at end of machine, heavy duty telescoping outbound roller panel support, 6x60mm maximum banding dimension, with original manuals, tool kit, etc.
Click for Large Image
 Print Item

 
BRANDT - KD 68 EDGEBANDER US0214
Print Item Email this machine to a friend
List Price: $17,900.00
Condition: ATFS
Machine Stock Number: US0214
Member Stock Number: EB290009306
Serial Number: 0-261-03-7413
DD: D
Machine ID: US0214

Description:
Brandt KD 68 Edgebander in very good condition. Well maintained. Available immediately.

Manufactured 1997, SN 0-261-03-7413

208/230V 3 Phase 60Hz

1/4" standard edge thickness capacity (8mm max.)
Edgebanding maximum 60 mm (2 3/8")
Workpiece minimum length 160mm (6 3/8")
Workpiece minimum width 70mm (2 3/4")

Quick Melt glue system with 10 minute heat up time
Reversible glue roller
Automatic magazine for strip and coil stock
3mm PVC guillotine
3 roller pressure section

Workstations:
Special double motor end trim on uni-slide (0.33HP/14,400rpm motors)
0 degrees to 15 degrees Chamfers
Top and bottom flush/bevel & radius trim
0 degrees to 15 degrees bevel (0.5HP/14,400rpm motors)
Digital readouts
Top and bottom scraping for standard or 3mm PVC edging w/air-jet blow-off and digital readouts
Top and bottom buffing (0.25HP/1,650rpm motors)
Feed speed 36fpm

Electronic brakes on both trimmers
Padded sound enclosure
Eye level swivel control panel

Original Service and Operator's Manual
Click for Large Image
 Print Item

Displaying 9 Listing(s).